Rotation of wheels
Rotation of wheels should be made regularly according to the schedule of routine maintenance of the car, and also at identification of signs of non-uniform wear of protectors. At rotation the car should be lifted over the earth – use a case and check also a condition of components of brake system (see. Section Check of brake system).
|
|
1. It is recommended to make rotation of the wheels equipped with radial tires, according to the offered scheme (address to an accompanying illustration). The majority of models are completed with tires with the directed protector, the directed tires are easy for distinguishing on existence on a lateral wall of the arrow specifying the correct direction of rotation of a wheel. Two tires should enter into a set with the right direction of rotation and two – with left. Wheels with such tires should be rearranged only between axes, leaving them on one party of the car. |
2. The detailed description of procedure of change of wheels is stated in Poddomkrachivaniye's Section and towage. Track reliability of fixing of the car in the lifted situation. 3. It will be most correct to lift all car over the earth, use the winch, or поддомкратьте the car and establish it on props (use for car fixing in the lifted situation less than four props by no means is inadmissible!). 4. On termination of rotation check pressure of a rating of tires, correct it according to standard requirements. Make sure that wheel are tightened by nuts with demanded effort. |
|
More detailed information on wheels and tires is stated in Head the Suspension bracket and a steering of the real Management.
|