|
Toyota Land Cruiser 100/Amazon, Lexus LX 470since 1997 of releaseRepair and car operation |
|
Toyota Land Cruiser, Amazon, LX470 Lexus + Identification numbers of the car + Governing bodies and receptions of safe operation of the car + Settings and routine maintenance of the car + Engine + Systems of cooling of the engine, salon and air conditioning heating + the Power supply system and production of the fulfilled gases + engine Electric equipment - Control systems of the engine and decrease in toxicity of the fulfilled gases Specifications System of onboard diagnostics (OBD) - a principle of functioning and codes of malfunctions Oscillograph application for supervision of working signals of a control system Check of a condition and ESM replacement Information sensors - the general information and check of serviceability of functioning Replacement of information sensors System of catching of fuel evaporations (EVAP) - the general information, check of a condition and replacement of components System of operated ventilation of a case (PCV) The catalytic converter - the general information, check of a condition and replacement + gear shifting Box + Transmission line + Brake system + Suspension bracket and steering + Body + Onboard electric equipment |
Control systems of the engine and decrease in toxicity of the fulfilled gases General information For the purpose of decrease in level of issue in the atmosphere of the toxic components getting to composition of fulfilled gases of the engine as a result of evaporation and incompleteness of combustion of fuel, and also for maintenance of efficiency of return of the engine and the decrease in fuel consumption considered in the real Management cars are equipped with a number of special systems which can be united under the general name of control systems of the engine and decrease in toxicity of the fulfilled gases. The complete set of systems depends from year of release of models and the region, on whose market the car is delivered. Full information on type to structure of systems is provided on the information label of VECI fixed under a cowl (see. Introduction).
To number of the systems concerning management of operation of the engine and control of toxicity of fulfilled gases, it is necessary to carry the following:
Functioning of all listed systems, anyway, directly or indirectly, is connected with management of decrease in toxicity of the fulfilled gases. In the Sections provided below the general descriptions of principles of functioning of each of systems are given, and also procedures of diagnostic checks and regenerative repair (if that is obviously possible) the separate components which performance lies within qualification of the average amateur mechanic are stated The scheme of laying of vacuum lines on models of V8 1998 g вып.
The scheme of laying of vacuum lines on models of V8 1999-2000 g вып.
The scheme of laying of vacuum lines on the V8 models
Before coming to conclusion about refusal any of systems of decrease in toxicity, attentively check serviceability of functioning of power supply systems and ignition (see. Heads of the Power supply system and production of the fulfilled gases and engine Electric equipment). Diagnostics of systems of decrease in toxicity some of knots demands use special, difficult in application, the equipment and a certain qualification of the performer, and therefore, it will be reasonable to charge its performance to professional mechanics of specialized car repair shop. Told does not mean above that service and repair of components of systems of decrease in toxicity in practice are represented exigeant. It is necessary to remember that one of the most widespread causes of failures is elementary violation of quality of vacuum or electric contact connections, and therefore, first of all always it is necessary to check a condition of electric sockets and shtutserny connections of vacuum lines (address to illustrations above). The owner of the car can independently and it is rather easy to make a number of checks, and also, to execute in house conditions a set of procedures of routine maintenance of the majority of components of systems, using thus a usual set of the adjusting and metalwork tool.
Try to observe everything the measures of precautions stipulated in below-mentioned Sections at performance of service of electronic components of considered systems. It is necessary to notice that the illustrative material can correspond not always in accuracy to real placement of components on the car. Such discrepancies are connected with continuously occurring process of updating within a standard design of each model. |
|