Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
- Gear shifting box
   + Automatic transmission (AT)
   + Transfer case
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Gear shifting box

Specifications

General parameters

Characteristic

Value

Type

4-or 5-ступечатая, A343F, A440F

Type and ATF volume

See. Head of Control and routine maintenance of the car

Distance from a hydrotransformer end face to a cut of a bell of transmission, mm

not less than 17.1

Efforts of a tightening of carving connections, Nanometer

Connection type

Value

Sensor of temperature of ATF

15

Lock ring to the valve case

10

Drain stopper of ATF

20

Bolts of fastening of the pallet to the AT case

74

Bolt of fastening of the sensor switch of permission of start

13

The sensor switch of permission of start to AT control lever

13

Nut of the sensor switch of permission of start

4

The VSS sensor basis to the AT case

16

The VSS sensor case to the AT case

5.4

Bolts of fastening of AT to the engine

72

Fixture of tubes of a maslookhladitel to the AT case

32

Arm of a latch of situation P to the AT case

7.4

Case of the electromagnetic valve

11

Nut of fastening of draft of switching to the selector lever

13

Bolts of fastening of the case of klapanny assembly

10

Transfer case. HF2A (V) type

Efforts of a tightening of carving connections, Nanometer

Connection type

Value

Nuts of connecting flanges (forward and back)

106

Bolts of fastening of a protective casing of a transfer case to a cross-section beam

28

Bolts of fastening of a transfer case to AT

69

Bolts of fastening of a cross-section beam

50

Nuts of fastening of a cross-section beam

74

Jellied and drain jams

37

Fixture of the forward and back case and their covers

37

The back case to fastening

39

Control lever clamp transfer case

12

The electromotor of the actuation mechanism to the forward case

18

Carving stopper to the forward case

19

Carving stopper to the back case

29

Driving gear wheel of the sensor of speed (VSS)

11

Sensors of modes of a transfer case

37

Knot of a rod of management to the lever

14

Grid of a maslozabornik to the back case

4.9

Maslozabornik to the forward case

12

Plate of the basis of the oil pump

43

Cover of the oil pump

4.9