Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation

Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
- Settings and routine maintenance of the car
   Schedule of routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of the AT working liquid
   Check of level of liquid of the power steering
   Replacement of impellent oil and oil filter
   Check, service and battery room charging
   Check of a condition of components of system of cooling
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition and replacement of brushes of screen wipers
   Rotation of wheels
   Check of a condition of components of a suspension bracket and steering drive
   Greasing of components of the chassis
   Check of a condition of components of system of production of the fulfilled gases
   Check of level of greasing in a transfer case
   Check of level of greasing of differential
   Check of a condition of seat belts
   Check and adjustment of turns of idling
   Check of a condition of protective covers of power shafts
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Replacement of a filtering element of an air purifier
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition of components of a power supply system
   Check of brake system
   Adjustment of height of situation and free wheeling of a pedal of a brake
   Check of a condition and replacement of spark plugs (petrol engines)
   Check and adjustment of gaps of valves
   Replacement of the fuel filter
   Check and service of the conditioner of air (To/in)
   Service of system of cooling
   Condition check, stuffing by greasing and adjustment of forward naves and wheel bearings
   Replacement of ATF of automatic transmission and main transfer
   Replacement of greasing of a transfer case
   Replacement of greasing of differential
   Check of a condition of components of system of catching of fuel evaporations
   Check of serviceability of a condition of components of system of a retsirkulyatsiya of the fulfilled gases (EGR)
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Check of level of liquid of the power steering

In difference from the steering mechanism of usual type, in the reechny transfer equipped with the hydraulic booster working liquid which starts to need eventually replacement is used.

Location of the tank of GUR liquid is shown on accompanying illustrations in Settings and routine maintenance of the car. The tank is equipped with the screw cover which is turning off counter-clockwise.


1. Several times turn a steering wheel from an emphasis against the stop then establish forward wheels of the car in rectilinear situation and to muffle the engine.
2. In order to avoid dirt hit in hydraulic system wipe a cover and a tank surface pure rags.
3. Rotating counter-clockwise, remove from the tank equipped measuring shchupy a cover. To the touch estimate temperature moistening an edge щупа liquids.
4a. Carefully wipe an edge щупа pure неворсящейся rags, screw a cover into place, then again remove it and on щупу visually define level of liquid which should be depending on weather conditions in limits of the corresponding range (address to an accompanying illustration).
4b. On some models level of working liquid can be estimated through translucent walls of its tank (address to an accompanying illustration). Try not to allow an exit of level of GUR liquid out of limits of the bottom border of an admissible range.
5. If necessary liquid is added directly in the tank through a mouth of the last by means of a funnel. Use working liquid only the recommended grade.
6. If need for correction of level of liquid arises regularly and often, check on existence of signs of leaks the steering pump, a case of reechny transfer, and also all connecting lines of a hydraulic path of GUR system and their shtutserny connections.
7. At the idling engine remember level of working liquid in a tank.
8. Stop the engine and check distinction in GUR liquid levels at the working and stopped engine. If liquid level considerably changed (more, than on 5 mm), it is necessary to pump over GUR system.