1. Make on the car short (lasting about 15 minutes) a trip for an oil warming up in a transfer case, whenever possible include an all-wheel drive mode, try to banish the car on all possible high-speed modes, including movement by a backing.
2. To Poddomkratta the car also establish it on props.
3. Get under a transfer case drain capacity of suitable volume.
|
|
4. Turn out a drain stopper from the lower part of a case of a transfer case (see an illustration) and merge oil in the prepared container. |
5. After the effluence of oil will stop, wipe a stopper, screw it on a place and strongly tighten.
6. Turn out from a box case a jellied stopper.
7. Add in a box necessary amount of fresh oil of a demanded grade, – oil should start to follow too much a jellied opening.
8. Screw a stopper on a place and strongly tighten. Lower the car on the earth.
9. Make on the car a short trip after which once again check greasing level in a transfer case. |
|
