Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation


Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
- Settings and routine maintenance of the car
   Specifications
   Schedule of routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of the AT working liquid
   Check of level of liquid of the power steering
   Replacement of impellent oil and oil filter
   Check, service and battery room charging
   Check of a condition of components of system of cooling
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition and replacement of brushes of screen wipers
   Rotation of wheels
   Check of a condition of components of a suspension bracket and steering drive
   Greasing of components of the chassis
   Check of a condition of components of system of production of the fulfilled gases
   Check of level of greasing in a transfer case
   Check of level of greasing of differential
   Check of a condition of seat belts
   Check and adjustment of turns of idling
   Check of a condition of protective covers of power shafts
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Replacement of a filtering element of an air purifier
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition of components of a power supply system
   Check of brake system
   Adjustment of height of situation and free wheeling of a pedal of a brake
   Check of a condition and replacement of spark plugs (petrol engines)
   Check and adjustment of gaps of valves
   Replacement of the fuel filter
   Check and service of the conditioner of air (To/in)
   Service of system of cooling
   Condition check, stuffing by greasing and adjustment of forward naves and wheel bearings
   Replacement of ATF of automatic transmission and main transfer
   Replacement of greasing of a transfer case
   Replacement of greasing of differential
   Check of a condition of components of system of catching of fuel evaporations
   Check of serviceability of a condition of components of system of a retsirkulyatsiya of the fulfilled gases (EGR)
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Replacement of ATF of automatic transmission and main transfer

Replacement of ATF should be made on a regular basis, according to the schedule of routine maintenance of the car (see. Undressed the Schedule of routine maintenance). As transmission liquid remains hot still long time after trip end before starting procedure performance, wait complete cooling of the engine.

 PERFORMANCE ORDER

1. Prepare fresh transmission liquid of the corresponding grade (see. Specifications at the beginning of Head).
2. Number other necessary performance for the forthcoming procedure of tools and materials treat: a telezhechny jack, props for car fixing in the lifted situation, drain capacity in volume not less than 7.6 l and a stock of rags and old newspapers.
3. Park the car on an equal horizontal platform with a firm covering, поддомкратьте it and establish on props, having provided a free access to a drain stopper of the pallet of a case of transmission.
4. Get under the pallet drain capacity and all necessary stock. Try not to touch to located under with the car bottom to the warmed-up components of the power unit and system of production of the fulfilled gases. Having placed properly reception container, turn out a drain stopper (address to an accompanying illustration). When the liquid effluence completely will stop, wipe a drain stopper, screw it on the regular place and strongly tighten.
5. At the corresponding complete set of the car remove protection of a case of transmission, then turn out located on pallet perimeter fixing bolts.
6. A hammer with soft the brisk it is accurate обстучите the pallet for the purpose of destruction of a layer of landing hermetic (address to an accompanying illustration).

In order to avoid damage of interfaced surfaces do not try to hook the pallet the lever.

7. Lower the pallet and merge from it ATF remains.
8. Turn out fixing screws (address to an accompanying illustration) and remove the ATF filter from the case of klapanny assembly.
9. Carefully examine internal surfaces of the pallet, estimate a condition of a filtering element and merged ATF. In the course of use transmission liquid can change the originally bright red color on dark red and even brown, and also get a smell of burning, – such changes usually testify transmission overheats in use the car. At detection in liquid, the pallet or the filter of metal sawdust, or particles of a frictional material it is necessary to check a condition of the AT internal components or the rotation converter. For collecting metal sawdust magnets at which removal it is necessary to remember their arrangement are provided, – in case of their wrong installation the pallet will not close densely (address to an accompanying illustration). In case of absence of confidence at definition of a condition of liquid or the filter, address to specialists of car-care center.
10. Wash out the pallet solvent and, whenever possible, dry it the compressed air. With a scraper remove from interfaced surfaces of the pallet, a case and the case of klapanny assembly traces of a material of old laying.

Try not to damage an interfaced surface of the case of klapanny assembly made of an easy aluminum alloy.

Having replaced laying (address to an accompanying illustration), establish the new ATF filter.
11. Make sure of absoluteness of purity and dryness of an interfaced surface of the pallet and impose on it a pillow of Three Bond 1281 hermetic or similar (address to an accompanying illustration). Put on a branch pipe of a jellied mouth directing tube measuring щупа and press the pallet to a transmission case. Moving on pallet perimeter, in stages tighten fixing bolts with demanded effort.
12. Lower the car on the earth and through a jellied mouth fill in ATF of a demanded grade in transmission (see. Section Check of level of the AT working liquid).
13. Transfer transmission to the situation "R", cock the parking brake and start the engine.
14. Serially translate the AT selector lever through all provisions, having in summary returned it to the situation "R". check ATF level, in case of need make the corresponding adjustment, having finished liquid level to the correct mark in an edge measuring щупа.
15. During the first several days of operation of the car look under the car, checking transmission on existence of signs of development of leaks. Once again check ATF level, in case of need make adjustment (see. Section Check of level of the AT working liquid).