Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
- Settings and routine maintenance of the car
   Specifications
   Schedule of routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of the AT working liquid
   Check of level of liquid of the power steering
   Replacement of impellent oil and oil filter
   Check, service and battery room charging
   Check of a condition of components of system of cooling
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition and replacement of brushes of screen wipers
   Rotation of wheels
   Check of a condition of components of a suspension bracket and steering drive
   Greasing of components of the chassis
   Check of a condition of components of system of production of the fulfilled gases
   Check of level of greasing in a transfer case
   Check of level of greasing of differential
   Check of a condition of seat belts
   Check and adjustment of turns of idling
   Check of a condition of protective covers of power shafts
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Replacement of a filtering element of an air purifier
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition of components of a power supply system
   Check of brake system
   Adjustment of height of situation and free wheeling of a pedal of a brake
   Check of a condition and replacement of spark plugs (petrol engines)
   Check and adjustment of gaps of valves
   Replacement of the fuel filter
   Check and service of the conditioner of air (To/in)
   Service of system of cooling
   Condition check, stuffing by greasing and adjustment of forward naves and wheel bearings
   Replacement of ATF of automatic transmission and main transfer
   Replacement of greasing of a transfer case
   Replacement of greasing of differential
   Check of a condition of components of system of catching of fuel evaporations
   Check of serviceability of a condition of components of system of a retsirkulyatsiya of the fulfilled gases (EGR)
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Check of a condition of components of system of cooling

The wide range of engine failures is connected with violation of functioning of system of cooling. On the models equipped with AT, this system provides also ATF cooling, supporting thereby optimum conditions for transmission work.

Check of a condition of components of system of cooling should be made after complete cooling of the power unit (not less than in three hours after an engine stop).

Do not uncover at all a jellied mouth of a radiator at the hot engine!


 PERFORMANCE ORDER

1. Uncover a radiator for what at first turn it to the left to the first emphasis. If the hissing indicating superfluous pressure in system is heard, wait its terminations, then press a cover a palm down and continue to turn to the left before liberation. Carefully wash out a cover from within and outside pure water. Also wash out a jellied mouth of a radiator. From cleared surfaces all traces of corrosion should be completely removed. The cooling liquid which was in system should be rather transparent. If liquid is painted in color of a rust, the system should be washed out and filled with a fresh mix (see. Section Service of system of cooling). If level of liquid does not reach top, add in a radiator a little mix of demanded structure (see. Section Check of levels of liquids).
2. Attentively examine the top and bottom radiatorny hoses, and also hoses of system of heating of the salon, having smaller diameter and located between the power unit and a partition of an impellent compartment. Check hoses on all their length and in case of identification of cracks, swellings and signs of aging of a material make replacement of defective components (address to an accompanying illustration). Small cracks are usually simpler for making out at a hose szhimaniye. Regardless of a condition it is necessary to change hoses approximately time in two years.
3. Check reliability of fastening of all hoses on the unions/branch pipes. Leakages of cooling liquid usually are shown in a look потеков rusty or white color on surfaces surrounding their source. If hoses are fixed on unions/branch pipes by collars of braided type, it will be reasonable to replace the last more reliable worm or screw.
4. By blowing off by the compressed air, or by means of a soft brush, remove from gaps between plates of the heat exchanger of a radiator old leaves, remains of insects and other garbage. Try not to damage soft plates of the heat exchanger and not to cut about their keen edges fingers.
5. Every second check, and also at the first signs of violation of functioning of system of cooling make check of a cover of a radiator by pressure. If near at hand there will be no suitable equipment, address for the help on car repair shop.