Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
- Suspension bracket and steering
   Specifications
   Removal and installation of forward shock-absorbers
   Removal and installation of the forward stabilizer of cross-section stability
   Removal and installation of assembly of a rotary fist with a nave
   Check of a condition and replacement of spherical support
   Removal and installation of torsionny bars
   Removal and installation of the top managing director of the lever of a forward suspension bracket
   Removal and installation of the bottom managing director of the lever of a forward suspension bracket
   Removal and installation of back shock-absorbers
   Removal and installation of a bar of the back stabilizer of cross-section stability
   Removal and installation of a jet bar
   Removal and installation of a screw spring of a back suspension bracket
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Condition check, removal and installation of drafts of a steering drive
   Replacement of protective covers of assembly of the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the steering pump
   Air removal from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Corners of installation of wheels
+ Body
+ Onboard electric equipment



Removal and installation of back shock-absorbers

 PERFORMANCE ORDER

1. Prop up forward wheels protivootkatny boots. Weaken nuts of fastening of back wheels. To Poddomkratta a car back also establish it on props. Remove back wheels.
2. Prop up the back bridge a telezhechny jack. Remove from the case of the back bridge an arm of a cable of the parking brake.
3. Disconnect the bottom end of the shock-absorber from a basic arm on assembly of the back bridge (address to an accompanying illustration).
4. Give a nut of fastening of the top end of the shock-absorber (address to an accompanying illustration), access to a nut is extremely limited, therefore it will be simpler to fix it a key and to rotate the shock-absorber.
5. Installation is made upside-down. Track correctness of landing of adjusting components of the top support of the shock-absorber (address to an accompanying illustration). All fixture tighten with demanded effort.