Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
- Suspension bracket and steering
   Specifications
   Removal and installation of forward shock-absorbers
   Removal and installation of the forward stabilizer of cross-section stability
   Removal and installation of assembly of a rotary fist with a nave
   Check of a condition and replacement of spherical support
   Removal and installation of torsionny bars
   Removal and installation of the top managing director of the lever of a forward suspension bracket
   Removal and installation of the bottom managing director of the lever of a forward suspension bracket
   Removal and installation of back shock-absorbers
   Removal and installation of a bar of the back stabilizer of cross-section stability
   Removal and installation of a jet bar
   Removal and installation of a screw spring of a back suspension bracket
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Condition check, removal and installation of drafts of a steering drive
   Replacement of protective covers of assembly of the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the steering pump
   Air removal from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Corners of installation of wheels
+ Body
+ Onboard electric equipment



Wheels and tires – the general information

Standard sizes of tires


Wheels of all models of cars described in the real Management are equipped with radial tires of the metric size with a steklotkanevy or steel cord (address to an illustration above). Installation on the car of tires of other standard size can affect its controllability and comfort of a course.

At all do not establish on one axis of the car of the tire of a various design! It is recommended to make replacement of tires on both wheels of one axis at the same time. If replacement only one wheel is made, watch, that the replaceable tire corresponded on a steam room standard size.

Extremely important from the point of view of controllability of the car to support demanded pressure in tires. Regularly, at least, once a month, check pressure of a rating of tires (see. Head of Control and routine maintenance of the car). Also check pressure before each distant trip.

Disks of wheels are subject to replacement in case of deformation, violation of density of landing to them tubeless tires, strong damage by corrosion, violation of vertical symmetry, development to an oval form of boltovy openings, and also in case of a constant spontaneous otpuskaniye of fixing nuts. It is not recommended to make regenerative repair of the damaged disks with application of welding or клепки.

Deformation of disks is usually connected with arrival on borders during an inaccurate parking of the car. Is inadmissible to continue car operation with pognuty disks – олесо it should be repaired in a shinomontazhny workshop. For check of a condition of disks поддомкратьте the car also establish it on props. Visually check disks on existence of cracks and signs of deformations.

The important factor defining parameters of movement and braking of the car, balancing of wheels assembled is. Violation of this parameter can essentially reduce controllability of a vehicle, not to mention appreciable reduction of service life of tires. Each time after tire replacement a wheel is subject to balancing in the conditions of a shinomontazhny workshop.