Toyota Land Cruiser, Amazon, LX470 Lexus + Identification numbers of the car + Governing bodies and receptions of safe operation of the car + Settings and routine maintenance of the car + Engine + Systems of cooling of the engine, salon and air conditioning heating + the Power supply system and production of the fulfilled gases + engine Electric equipment + Control systems of the engine and decrease in toxicity of the fulfilled gases + gear shifting Box + Transmission line + Brake system - Suspension bracket and steering Specifications Removal and installation of forward shock-absorbers Removal and installation of the forward stabilizer of cross-section stability Removal and installation of assembly of a rotary fist with a nave Check of a condition and replacement of spherical support Removal and installation of torsionny bars Removal and installation of the top managing director of the lever of a forward suspension bracket Removal and installation of the bottom managing director of the lever of a forward suspension bracket Removal and installation of back shock-absorbers Removal and installation of a bar of the back stabilizer of cross-section stability Removal and installation of a jet bar Removal and installation of a screw spring of a back suspension bracket Removal and installation of levers of a back suspension bracket Removal and installation of a steering wheel Condition check, removal and installation of drafts of a steering drive Replacement of protective covers of assembly of the steering mechanism Removal and installation of the steering mechanism Removal and installation of the steering pump Air removal from a hydraulic path of system of strengthening of a wheel Wheels and tires - the general information Corners of installation of wheels + Body + Onboard electric equipment
|
Specifications
General parameters
|
Characteristic |
Value |
|
Suspension bracket type |
|
|
Lobby |
Independent with the dual bifurcate lever and the stabilizer of cross-section stability |
|
The back |
Dependent, with 4 drafts and the stabilizer of cross-section stability |
|
Type of the steering mechanism |
Reechny with hydrostrengthening |
|
Transfer number of the steering mechanism, the general |
19.8 |
|
Minimum radius of a turn, m |
05.8 |
|
Wheel base, mm |
2850 |
|
Track of wheels, mm |
|
|
Lobbies |
1620 |
|
Lobbies |
1615 |
|
Distance "And" at installation of a new torsionny bar (address to an illustration Measurement of distance "And") |
|
|
The left |
8 ÷ 25 |
|
The right |
2 ÷ 18 |
|
Height of a suspension bracket, mm |
|
|
Lobby |
71 |
|
The back |
51 |
Efforts of a tightening of carving connections, Nanometer
Forward suspension bracket
|
Characteristic |
Value |
|
Bolts of fastening of the bottom control levers of a suspension bracket to a bearing frame |
230 |
|
Bolts of fastening of the top control levers of a suspension bracket to a bearing frame |
98 |
|
Bolts of fastening of conducting of the ABS sensor |
13 |
|
Stabilizer of cross-section stability |
|
|
Bolts of fixing collars |
18 |
|
Top nuts of fastening of racks |
25 |
|
Top bolts of fastening of racks |
52 |
|
Nuts of fastening of the torsionny lever |
225 |
Back suspension bracket
|
Characteristic |
Value |
|
Bolts with nuts of a cross-section jet bar |
|
|
The top |
150 |
|
The bottom |
149 |
|
Bolts of fastening of shock-absorbers |
|
|
The bottom bolts (on one) |
64 |
|
The top bolts (on one) |
20 ÷ 25 |
|
Stabilizer of cross-section stability |
|
|
Bolts of fixing collars and arms |
18 |
|
Nuts of racks to arms |
15 |
|
Nuts of racks to the stabilizer |
26 |
|
Nuts of levers of a suspension bracket |
150 |
Steering drive
|
Characteristic |
Value |
|
Nut of fastening of a steering wheel
|
34 |
|
Nut of fastening of a pulley of a drive of the steering pump
|
43 |
|
Damper of a steering drive
|
|
|
Bolt/nut of fastening of a damper to a frame
|
13 |
|
Nut of a spherical finger of fastening of a damper to cross-section steering draft |
59 |
Corners of installation of wheels (without loading)
Given for check of forward wheels
|
Characteristic |
Value |
|
Toyota Land Cruiser V8 Amazon (UZJ100)
|
|
|
Disorder
|
- 0°40 '÷ 0°50' |
|
Convergence
|
- 0°6 '÷ 0°18' (-0.71 mm of ÷ 2.13 mm) |
|
Выбег
|
1°25 '÷ 2°55' (4.7 l); 1°40 '÷ 3°10' (4.2D); |
|
Toyota Land Cruiser Amazon (UZJ/HDJ100) of HS
|
|
Disorder
|
- 0°45' – 0°45' |
Convergence
|
- 0°12' – 0°12' (-1.42 mm – 1.42 mm) |
| Выбег |
2°20 '÷ 3°50' |
Given for installation of forward wheels
|
Characteristic |
Value |
Toyota Land Cruiser V8 Amazon (UZJ100)
|
|
Disorder
|
0°5 '± 45' |
Convergence
|
0°6 '± 12' (0.71 mm of ± 1.42 mm) |
Выбег
|
2°10 '± 45' (4.7 l); 2°25' – 45' (4.2D) |
Cross-section inclination of an axis of turn of wheels
|
12°10 '± 45' |
Toyota Land Cruiser Amazon (UZJ/HDJ100) of HS
|
|
Disorder
|
0 ° ± 45' |
Convergence
|
0 ° ± 12' (0 ± 1.42 mm) |
Выбег
|
3°5 '± 45' |
Cross-section inclination of an axis of turn of wheels
|
12°15 '± 45' |
All models
|
|
Difference of disorder of the left and right wheel
|
0°30' |
|
Difference выбега left and right wheel
|
0°30' |
|
Maximum angle of rotation of a wheel
|
|
|
Inside
|
35°12 '± 1°30' |
|
Outside |
32°36' |
|
|