Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
- Suspension bracket and steering
   Specifications
   Removal and installation of forward shock-absorbers
   Removal and installation of the forward stabilizer of cross-section stability
   Removal and installation of assembly of a rotary fist with a nave
   Check of a condition and replacement of spherical support
   Removal and installation of torsionny bars
   Removal and installation of the top managing director of the lever of a forward suspension bracket
   Removal and installation of the bottom managing director of the lever of a forward suspension bracket
   Removal and installation of back shock-absorbers
   Removal and installation of a bar of the back stabilizer of cross-section stability
   Removal and installation of a jet bar
   Removal and installation of a screw spring of a back suspension bracket
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Condition check, removal and installation of drafts of a steering drive
   Replacement of protective covers of assembly of the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the steering pump
   Air removal from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Corners of installation of wheels
+ Body
+ Onboard electric equipment




Removal and installation of the steering mechanism

Models of cars considered in the real Management are equipped with system of additional safety (SRS). Before starting performance of any works near the block of a safety cushion, a steering column or the dashboard, disconnect SRS in order to avoid receiving traumas at its casual operation (see. Onboard electric equipment). Electroconducting of a chain of SRS is easy for distinguishing on yellow color of isolation. In order to avoid SRS system damage, Track, that the steering shaft was not turned after removal of a steering wheel. Block a column the ignition key at the rectilinear provision of forward wheels.


Components of assembly of the steering mechanism


Components of installation of the steering mechanism


 PERFORMANCE ORDER

1. Park the car with the forward wheels developed in rectilinear situation. Cock the parking brake. Weaken wheel nuts, поддомкратьте a front of the car and establish it on props. Remove forward wheels and protection of a case.
2. Disconnect lateral steering drafts from rotary fists (see. Section condition Check, removal and installation of drafts of a steering drive).
3. Remove a bar of the stabilizer of cross-section stability (see. Section Removal and installation of the forward stabilizer of cross-section stability).
4. Mark the provision of an intermediate shaft of rather steering mechanism and turn out a through bolt of the connecting kardanny hinge of a steering shaft.
5. Disconnect from a case of the steering mechanism pressure head and returnable lines of a hydraulic path (address to an illustration Components of assembly of the steering mechanism).
6. Turn out fixture (With and to D) an assembly bracket on the right side of assembly, give a nut and take a through bolt (B) at the left. In summary turn out a bolt (A) (address to an illustration Components of installation of the steering mechanism).
7. Remove assembly of the steering mechanism from the car.
8. If at the removed steering mechanism for any reason the provorachivaniye of a steering shaft was made, remove a steering wheel and center a contact drum of a safety cushion (see. Section Removal and installation of a steering wheel).
9. Installation is made upside-down. Track that all fixture was tightened with demanded effort.
10. In summary pump over GUR system (see. The section air Removal from a hydraulic path of system of strengthening of a wheel).