Removal and installation of the bottom managing director of the lever of a forward suspension bracket
PERFORMANCE ORDER
1. Cock the parking brake. Weaken nuts of fastening of the corresponding forward wheel. To Poddomkratta a car front also establish it on props. Remove a wheel. 2. At the corresponding complete set remove protection of a case. 3. Remove a torsionny bar (see. Section Removal and installation of torsionny bars). 4. Disconnect a rack of a bar of the stabilizer and disconnect the bottom fastening of the shock-absorber from the bottom lever of a suspension bracket (see. Section Removal and installation of forward shock-absorbers). 5. Disconnect a rotary fist from the bottom lever.
6. Give bolts and nuts and remove the lever (address to an accompanying illustration).
7. Installation is made upside-down. All fixture tighten with demanded effort.
The tightening of axial bolts/nuts should be made after car lowering on the earth.