1. Weaken wheel nuts. To Poddomkratta the car also establish it on props. Remove forward wheels. 2. Holding a shock-absorber rod from a provorachivaniye a face key give a fixing nut of the top support of assembly (address to an illustration above). 3. Trying to remember the adjusting provision of components, remove rubber plugs and washers. 4. Give a nut of a through bolt of fastening of the bottom support of the shock-absorber to the bottom lever of a suspension bracket. 5. Unscrew bolts of fastening of the bottom support of the shock-absorber. 6. Omit assembly down and take it through a wheel arch. 7. Check a condition of rubber plugs of the top support of the shock-absorber, defective components replace. 8. Rock down not loaded car from the suspicious shock-absorber. The car corner with the serviceable shock-absorber after it released, should return on the place, without making oscillating motions. The tendency to a swing up-down or inability of the car after pair of nods to return to a starting position hints at the faulty shock-absorber. 9. Installation is made upside-down. Track, that all fixture was tightened with demanded effort. |
|