Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Search of causes of failures of electric equipment
   Safety locks - the general information
   Fusible inserts - the general information
   Chain breakers - the general information
   The relay - the general information and check of serviceability of functioning
   Digital tire of data of CAN
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system and switch of the last
   Replacement of the switch of indexes of the turn/switch of modes of functioning of external lighting devices
   Replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of the switch of modes of functioning of cleaners of a windscreen
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Removal and installation of block headlights
   Replacement of lamps
   Removal and installation of an audiosystem and its loudspeakers
   Removal and installation of the aerial of a radio receiver
   Check of serviceability of functioning, replacement of the electromotor of a drive of screen wipers and pump of washers
   Check of serviceability of functioning and replacement of the switch of heating of back glass
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Removal and installation of a combination of devices
   Check of serviceability of functioning and replacement of horns of a horn
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   Control system of speed (темпостат) - general information, check of serviceability of functioning of components
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock and system of remote control by door activators - general information and check of serviceability of functioning
   Running fires of light time of day (DRL)
   Safety cushions - the general information
   + Schemes of electric connections - the general information




The electric drive of external rear-view mirrors – general information and check of serviceability of functioning

For a drive of a lateral rear-view mirror two electromotors are used: one provides adjustment of provision of a mirror in the vertical plane, the second – in horizontal. In addition, on some models the electroheating of mirrors working at inclusion of heating of back glass is provided.

 PERFORMANCE ORDER

1. The switch of management of the electric drive is usually equipped with the selector knot providing a choice of the direction of giving of tension (on right or on the left mirror). Without starting the engine, turn the ignition key in the situation ON, lower door glasses and test all modes of functioning of the electric drive of both lateral mirrors.
2. Attentively listen to published by electromotors of a drive of mirrors to sounds.
3. If aurally the motor works regularly, however the mirror does not change the situation, probably, defect of the driving mechanism in a mirror takes place. Remove the corresponding mirror and disassemble it for search of a cause of failure.
4. If mirrors do not function and motors of their drives do not publish any sounds, check a condition of the corresponding safety lock (see. Head of Control and routine maintenance of the car).
5. If a safety lock as it should be, remove from the support the switch of management of functioning of the electric drive of mirrors (do not disconnect electroconducting). Include ignition and check serviceability of giving of a food on the switch. Tension should take place on one of plugs of the socket of the switch, otherwise check a condition of connecting electroconducting on a site between the switch and the assembly block of safety locks.
6. If a food moves regularly, disconnect electroconducting and check correctness of distribution of provodimost between switch plugs in its various provisions (in the situation OFF conductivity should be absent).
7. The faulty switch is subject to replacement.
8. Restore initial connection of electroconducting and find a wire of grounding of assembly of the switch. Duplicate grounding by a wire crossing point. If now the motor starts to function, it is necessary to restore quality of grounding of assembly on weight.
9. If grounding as it should be, and a drive still does not operate, remove from mirror assembly a cover and check serviceability of giving of a food on the driving electromotor. Include ignition and transfer the selector switch of assembly of management to adjustment of the corresponding mirror. When moving a key of adjustment of provision of a mirror to any of working provisions on a drive of the last tension should move.
10. At identification of violations in giving of a food check an electroconducting condition on a site between the switch and a drive.
11. If tension moves regularly, remove a mirror and check serviceability of functioning of its drive by a direct zapityvaniye from the battery:
   a. By means of wires crossing points connect a positive pole of the battery to the plug No. 3 of the driving electromotor, negative to the plug No. 1, the mirror should turn to the left;
   b. At polarity change the mirror should turn to the right;
   c. Now connect the battery between plugs 2 (a positive pole) and 1 (a negative pole), the mirror should be developed up;
   d. At change of polarity of connection of the battery the mirror should be developed down.
12. The faulty mirror is subject to replacement (see. Head Body).