1. One horn of a horn is located behind a forward decorative lattice in space between a radiator with the right head block headlight. The additional horn, is symmetrized concerning the first to the left of a radiator.
2. Disconnect from a horn electroconducting and submit on one of its plugs tension of the battery. The second plug earth (use wires crossing points). If the horn does not publish a sound signal, replace it.
3. At serviceable operation of a horn check serviceability of giving of tension on plugs of the contact socket of a horn when squeezing the klaksonny button. If a food moves regularly, estimate quality of grounding of assembly.
4. If giving of a food is broken, check a condition of the corresponding relay (see. The Relay section - the general information and check of serviceability of functioning). Pay attention that as the klaksonny 4-contact assemblies, or 3-terminal relays earthed on the case are usually used.
5. If the relay as it should be, check serviceability of giving of tension in contours of its food and management. If though one of contours not запитывается, estimate a condition of the corresponding electroconducting between the relay and the assembly block.
6. If a food regularly moves on both contours of the relay, press the klaksonny button and check serviceability of grounding of a site of a chain between the button and the relay. In the absence of conductivity on weight, check a chain on break. If break is absent, replace the horn switch.
7. If grounding of the klaksonny switch is not broken, check on break or short circuit electroconducting on a chain site between the relay and the switch. |
|