Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Search of causes of failures of electric equipment
   Safety locks - the general information
   Fusible inserts - the general information
   Chain breakers - the general information
   The relay - the general information and check of serviceability of functioning
   Digital tire of data of CAN
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system and switch of the last
   Replacement of the switch of indexes of the turn/switch of modes of functioning of external lighting devices
   Replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of the switch of modes of functioning of cleaners of a windscreen
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Removal and installation of block headlights
   Replacement of lamps
   Removal and installation of an audiosystem and its loudspeakers
   Removal and installation of the aerial of a radio receiver
   Check of serviceability of functioning, replacement of the electromotor of a drive of screen wipers and pump of washers
   Check of serviceability of functioning and replacement of the switch of heating of back glass
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Removal and installation of a combination of devices
   Check of serviceability of functioning and replacement of horns of a horn
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   Control system of speed (темпостат) - general information, check of serviceability of functioning of components
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock and system of remote control by door activators - general information and check of serviceability of functioning
   Running fires of light time of day (DRL)
   Safety cushions - the general information
   + Schemes of electric connections - the general information



Replacement of lamps

Flasks of lamps remain hot within about 20 minutes after shutdown of lighting devices. Before starting to work make sure that components finally cooled down.


 PERFORMANCE ORDER

Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

Forward marker lights and indexes of turns

 PERFORMANCE ORDER

1. Turn out the top screw of fastening of assembly of a forward marker light (address to an accompanying illustration).
2. Remove assembly of a marker light and disconnect from it electroconducting.
3. Having turned a cartridge of a lamp counter-clockwise, take it from a casing of lantern assembly.
4. For lamp extraction from the boss pull it parallel to an assembly axis.
5. Installation is made upside-down.

The back combined lamps

 PERFORMANCE ORDER

1. Remove a lens of lantern assembly (address to an accompanying illustration).
2. For replacement of a lamp of the index of turn or a stoplight simply turn it counter-clockwise and take from a lampoderzhatel.

On some models of a lamp are taken from the back party of lantern assembly for what the last is necessary for dismantling.

3. For the purpose of ensuring access to a lamp of fire of a backing remove a plastic cover (address to an accompanying illustration).
4. For removal of the combined lamp assembled disconnect from it electroconducting (address to an accompanying illustration).
5. Installation is made upside-down.

Illumination of registration plate

 PERFORMANCE ORDER

1. At will поддомкратьте a car back also establish it on props. Find a lamp of illumination of registration plate from the back party of bamperny assembly, in case of need use a pocket small lamp.
2. For extraction of the boss turn it counter-clockwise and pull outside from a lamp casing. On models 4Runner turn out screws of fastening of a lens of a lamp.
3. For extraction of a lamp pull it strictly parallel to an axis of the boss.
4. Installation is made upside-down.

Control panel illumination by functioning of systems of heating/air conditioning

 PERFORMANCE ORDER

1. Remove the corresponding section of furnish of the dashboard (see. Head Body).
2. Having pulled, liberate from the boss the failed lamp.
3. Installation is made upside-down.

Dashboard illumination

Watch, that replaceable lamps corresponded on the performance data (power consumption) failed. Remember that lamps of illumination of measuring instruments have higher capacity, than display lamps.


 PERFORMANCE ORDER

1. Remove a combination of devices (see. Section Removal and installation of a combination of devices).
2. Turn lamp assembly with the boss counter-clockwise and take it from assembly of a combination of devices.
3. Having pulled a lamp outside, take it from the boss.
4. Installation is made upside-down.