Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation

Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
- Engine
   + Typical procedures of service of engines
   - Procedures of service of the petrol engine
      Removal and installation of covers of heads of cylinders
      Removal and installation of the inlet pipeline
      Removal and installation of final collectors
      Removal, check of a condition and installation of a gas-distributing belt and cogwheels of a drive of GRM
      Replacement of a forward epiploon (ов) cranked shaft / camshafts
      Replacement of a back epiploon of a cranked shaft
      Removal and installation of camshafts and pushers of valves
      Removal and installation of heads of cylinders
      Removal and installation of the pallet of a case of the engine
      Removal, check of a condition and installation of the oil pump
      Removal and installation of a driving disk
      Check of a condition and replacement of support of an engine mount
   + Procedures of service of the diesel engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of final collectors

Start procedure performance only after final cooling of the power unit.

Laying of final system to use it is repeatedly inadmissible. The Toyota company orders also replacement of nuts of fastening with the new.



1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Impregnate fixture of collectors with getting oil, then give nuts of fastening of the reception pipe connecting a final collector to the catalyst.
3. Disconnect the electric socket a lambda probe.
4. Give small bolts of fastening of the heat-shielding screen to a collector.
5. Give eight nuts and remove a collector from a head of cylinders. Laying will throw out.


Final collectors and labels of laying


1. Installation is made as it should be, the return to an order of dismantle of components. Examine new laying between a collector and a head. Original laying of Toyota has the labels put with white paint. Laying is established by labels to a collector. Track the correct installation of laying (address to an illustration above).
2. Establish a collector with new laying, combining hairpins with a reception pipe. Also new laying between a reception pipe and a collector is required. For installation use new nuts and tighten them with effort of 44 Nanometers.
3. Establish the heat-shielding screen and tighten four bolts with effort of 7.5 Nanometers.
4. Tighten nuts of fastening of a reception pipe to a collector with effort of 62 Nanometers.
5. Start the engine and check it on existence of signs of leakages of the fulfilled gases.