Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
- Engine
   - Typical procedures of service of engines
      Preparatory actions and the list of repair procedures which can be executed without engine extraction from the car
      Reduction of the piston of the first cylinder in the provision of the top dead point (VMT)
      Check of pressure of oil
      Check of kompressionny pressure in cylinders
   + Procedures of service of the petrol engine
   + Procedures of service of the diesel engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Typical procedures of service of engines

Preparatory actions and the list of repair procedures which can be executed without engine extraction from the car

Make cleaning of an impellent compartment and external surfaces of the power unit with application of one of a wide range of special solvents. Such processing will allow to avoid dirt hit in the engine.

In case of need, the forthcoming work defined by character, it is possible to remove a cowl for the purpose of ensuring freedom of access to components subject to service (see. Head Body). Cover car wings with special covers, or simply old blankets in order to avoid casual damage of a paint and varnish covering.

If existence of suspicions on losses of depression/leakage of the oil cooling liquids, the fulfilled gases, etc. indicates need of performance of replacement of the corresponding laying or epiploons, practically any of the listed procedures can be executed without engine extraction from the car (in situ). Told concerns procedures of replacement of laying of the inlet pipeline and a final collector, the pallet of a case, a head of cylinders, and also epiploons of a cranked shaft.

Dismantle, repair and installation of such external knots and hinged units as the inlet pipeline, the final collector, the case pallet, oil and water pumps, a starter, the generator and power supply system components also can be made by in situ.

As the head of cylinders can be removed from the engine without preliminary extraction of the power unit, repair of camshafts and service of the klapanny mechanism also can be made directly on the car. Besides, in situ is usually made replacement of a belt and cogwheels of a drive of GRM.

In an emergency performance of in situ of repair and replacement of piston rings, pistons, rods and shatunny bearings of a cranked shaft is allowed also. However it is not necessary to abuse such possibility in view of the difficulties connected with need of observance of purity and carrying out a number of preparatory procedures, such as dismantle of power shafts, components of a steering drive, the stabilizer of cross-section stability, support of a suspension bracket of the unit, etc.