Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of a decorative front grille
   Removal and installation of forward and back bumpers
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of external rear-view mirrors
   Removal, installation and adjustment of doors
   Removal and installation of forward wings
   Removal, installation and adjustment of a door of a back
   Removal and installation flew down also a regulator of a window regulator of a door of a back
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of latches, zamkovy cylinders and door handles
   Removal and installation of a cover of the top hatch with a drive
   Removal and installation of a casing of a steering column
   Removal and installation of the central console
   Removal and installation finishing and main dashboard sections
   Removal and installation of a lattice of an air inlet of a forward fairing
   Removal and installation of seats
   Removal and installation of an internal rear-view mirror
+ Onboard electric equipment




Removal and installation of seats

Forward seats

Electric drive of seats and arrangement of its components


 PERFORMANCE ORDER

1. On the models equipped with electrodriving seats disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Remove carpets and disconnect electroconducting.
3. Remove covers of a sled of a seat.
4. Turn out fixing bolts and remove seat assembly (address to an accompanying illustration).
5. Disconnect the socket from the motor of the electric drive of a seat (address to an illustration at the beginning of the Section).
6. Give bolts of fastening of the motor to a frame and remove it.
7. Installation is made upside-down. Track reliability of a tightening of fixture.

Back seats

 PERFORMANCE ORDER

1. Release locks from two parties of a back of a seat.
2. Remove slips and turn out bolts of forward fastening of a seat to a floor. To remove a back, turn out bolts of the central loop and axial bolts from two parties. Remove a pillow and a back.
3. Put hermetic in carving openings and establish a pillow and a seat back. Tighten fastening bolts to a floor with demanded effort.