Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation


Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of a decorative front grille
   Removal and installation of forward and back bumpers
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of external rear-view mirrors
   Removal, installation and adjustment of doors
   Removal and installation of forward wings
   Removal, installation and adjustment of a door of a back
   Removal and installation flew down also a regulator of a window regulator of a door of a back
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of latches, zamkovy cylinders and door handles
   Removal and installation of a cover of the top hatch with a drive
   Removal and installation of a casing of a steering column
   Removal and installation of the central console
   Removal and installation finishing and main dashboard sections
   Removal and installation of a lattice of an air inlet of a forward fairing
   Removal and installation of seats
   Removal and installation of an internal rear-view mirror
+ Onboard electric equipment




Removal and installation flew down also a regulator of a window regulator of a door of a back

Design of a door of a back

1 — a window regulator Regulator
2 — Right directing a window regulator
3 — a door Emphasis
4 — Back glass
5 — Left directing a window regulator
6 — the door Lock
7 — the Directing tape of facing of a window aperture
8 — the External sealing tape

9 — the Cover of a service opening
10 — the Plate
11 — the Cranked lever of a drive of a latch
12 — the lock Cylinder
13 — the Internal sealing tape
14 — the Facing panel of registration plate
15 — the Panel of an upholstery of a door of a back


 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. At will the door of a back can be removed from the car (see. Section Removal, installation and adjustment of a door of a back).
3. Remove the loopy poruchnevy handle of a door of a back, Having removed its panel and having turned out a fastening bolt.
4. Release ten clamps of fastening of the panel of an internal upholstery of a door. Disconnect electroconducting and turn out screws of fastening of a cover of a service opening (address to an illustration above).
5. Remove directing tape of facing of a window doorway of a back.
6. Disconnect the remained electroconducting, take out glass and remove assembly of a regulator of a window regulator (address to an accompanying illustration).
7. Installation is made upside-down.