|
Removal and installation of latches, zamkovy cylinders and door handles
|
|
In order to avoid receiving cuts of hands about edges of technological windows in a doorframe work in gloves! |
|
|
1. On the models equipped with electrodriving window regulators and the uniform lock, disconnect a negative wire from the battery.
|
|
If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action! |
2. Remove from a door the panel of an internal upholstery and the plastic vlagozashchitny screen (see. Section Removal and installation of panels of an internal upholstery of doors). |
|
Assembly of a latch of the lock
|
|
1. Highlighting itself a small lamp, try to define a connection order to a latch of executive rods. Disconnect a rod (and) from the lock.
2. On the models equipped with door activators, disconnect the corresponding electroconducting.
|
|
3. Turn out fixing screws (address to an accompanying illustration) and remove latch assembly from a door. |
6 Installation is made upside-down. Track reliability of a tightening of fixture. |
|
External handle and cylinder of the door lock
|
|
|
|
1. Remembering an order of connection of components, disconnect all executive rods brought to the external handle of a door and the zamkovy cylinder (address to an accompanying illustration). |
|
|
2. Turn out fixing bolts (address to an accompanying illustration) and remove from a door the external handle. |
3. Installation is made upside-down. Track reliability of a tightening of bolts. |
|
Internal handle
Removal of the internal handle is made in the course of dismantle of the panel of an internal upholstery of a door (see. Section Removal and installation of panels of an internal upholstery of doors).
|