Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of a decorative front grille
   Removal and installation of forward and back bumpers
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of external rear-view mirrors
   Removal, installation and adjustment of doors
   Removal and installation of forward wings
   Removal, installation and adjustment of a door of a back
   Removal and installation flew down also a regulator of a window regulator of a door of a back
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of latches, zamkovy cylinders and door handles
   Removal and installation of a cover of the top hatch with a drive
   Removal and installation of a casing of a steering column
   Removal and installation of the central console
   Removal and installation finishing and main dashboard sections
   Removal and installation of a lattice of an air inlet of a forward fairing
   Removal and installation of seats
   Removal and installation of an internal rear-view mirror
+ Onboard electric equipment




Removal and installation of a latch of the lock of a cowl and cable of its drive

Models of cars considered in the real Management are equipped with system of additional safety (SRS). Before starting performance of any works near the block of a safety cushion, a steering column or the dashboard, disconnect SRS in order to avoid receiving traumas at its casual operation (see. Onboard electric equipment). Electroconducting of a chain of SRS is easy for distinguishing on yellow color of isolation.


 PERFORMANCE ORDER

1. Remove a decorative front grille (see. Section Removal and installation of a decorative front grille).
2. Lead round latch assembly by a marker or a chertilka for the purpose of a guarantee of correctness of its installation at assembly. Turn out fixing bolts (address to an illustration) and remove a latch from a basic beam of a radiator.
3. Having wrung out a latch, disconnect from it a driving cable.
4. Installation is made upside-down. For adjustment of the lock release fixing bolts and as appropriate correct the provision of a latch. Track reliability of a tightening of fixture.
5. For replacement of a driving cable "walk" on it from a latch to a partition of an impellent compartment, liberating from all provided intermediate clamps and directing arms.
6. Pass to salon and remove the left section of the bottom furnish of the dashboard (see. Section Removal and installation finishing and main dashboard sections). Separate the lever of an otpuskaniye of the lock of a cowl from the dashboard (address to an accompanying illustration).
7. Separate from the lever a tip of a driving cable.
8. Tie up by the cable end a piece of a string and involve assembly in an impellent compartment.
9. Untie a cable from the left string passed through a partition.
10. Installation is made upside-down.