Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of a decorative front grille
   Removal and installation of forward and back bumpers
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of external rear-view mirrors
   Removal, installation and adjustment of doors
   Removal and installation of forward wings
   Removal, installation and adjustment of a door of a back
   Removal and installation flew down also a regulator of a window regulator of a door of a back
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of latches, zamkovy cylinders and door handles
   Removal and installation of a cover of the top hatch with a drive
   Removal and installation of a casing of a steering column
   Removal and installation of the central console
   Removal and installation finishing and main dashboard sections
   Removal and installation of a lattice of an air inlet of a forward fairing
   Removal and installation of seats
   Removal and installation of an internal rear-view mirror
+ Onboard electric equipment



Removal and installation of forward and back bumpers

During performance of procedures of removal and installation of bumpers of the useful it will be assisted the assistant.

Front bumper

Details of installation of a front bumper

1 — the Block headlight
2 — the Decorative lattice
3 — the Forward marker light
4 — the Arm of a support of a bumper
5 — the Central holder

6 — the Remote level
7 — the Lever of a front bumper
8 — the Lateral support
9 — the turn Index
10 — the Spoiler


 PERFORMANCE ORDER

1. Remove a decorative front grille (see. Section Removal and installation of a decorative front grille).
2. Remove indexes of turns (see. Onboard electric equipment).
3. Turn out bolts of levers of a bumper and bolts of fastening of a bumper to body elements (address to an illustration above).
4. Installation is made upside-down.

Rear bumper

Details of installation of a rear bumper

1 — the Right back gryazeotboynik
2 — the Right lateral overlay of a bumper
3 — the Left lever of a bumper
4 — the Right lever of a bumper
5 — the Arm of a support of a bumper

6,7 — the Sealant
8 — the Rear bumper
9 — the Left back gryazeotboynik
10 — the Overlay of a bumper
11 — the Left lateral overlay of a bumper


 PERFORMANCE ORDER

1. If do not plan to make replacement of a rear bumper and its basic arms, отболтите arms from a bearing frame of the car (address to an illustration above).
2. If the bumper is subject to replacement, отболтите from it arms.
3. Details of installation of a rear bumper are presented.
4. Installation is made upside-down. Track reliability of a tightening / защелкивания fixing elements.