Toyota Land Cruiser, Amazon, LX470 Lexus + Identification numbers of the car + Governing bodies and receptions of safe operation of the car + Settings and routine maintenance of the car + Engine + Systems of cooling of the engine, salon and air conditioning heating + the Power supply system and production of the fulfilled gases + engine Electric equipment + Control systems of the engine and decrease in toxicity of the fulfilled gases + gear shifting Box + Transmission line - Brake system Specifications System of anti-blocking of brakes (ABS) - the general information and codes of malfunctions Replacement of brake shoes Removal and installation of supports of disk brake mechanisms Condition check, removal and installation of a brake disk Removal and installation of the main brake cylinder (GTTs) Check of a condition and replacement of brake lines and hoses Sensitive to loading / перепускной the valve (LSP & BP) Adjustment of the parking brake Replacement of cables of a drive of the parking brake Check of serviceability of functioning / tightness, removal and installation of the amplifier of brakes Pumping of brake system Adjustment of a pedal of a foot brake Check of serviceability of functioning and replacement of the sensor switch of stoplights Sensors and ABS system activator + Suspension bracket and steering + Body + Onboard electric equipment
|
Adjustment of the parking brake
|
1. Raising and an otpuskaniye of the parking brake is made by means of the control lever located between forward seats. Built in in mechanisms of the parking brake regulators automatically compensate wear of brake boots. Nevertheless, the gradual pulling of a driving cable results over time in need of performance of additional adjustments. Complete raising of the parking brake on models is made at a pulling of the handle of management on 6-8 clicks of a ratchet. 2. Release the lever of the parking brake. 3. Remove the central console (see. Head Body).
|
4. Lock-nut rotation (address to an accompanying illustration) make adjustment of a tension of a driving cable, achieving complete raising of the parking brake at a lever pulling on demanded number of clicks of the ratchet mechanism. |
5. Establish into place the central console (see. Head Body). |
|
|
|