Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
- Brake system
   Specifications
   System of anti-blocking of brakes (ABS) - the general information and codes of malfunctions
   Replacement of brake shoes
   Removal and installation of supports of disk brake mechanisms
   Condition check, removal and installation of a brake disk
   Removal and installation of the main brake cylinder (GTTs)
   Check of a condition and replacement of brake lines and hoses
   Sensitive to loading / перепускной the valve (LSP & BP)
   Adjustment of the parking brake
   Replacement of cables of a drive of the parking brake
   Check of serviceability of functioning / tightness, removal and installation of the amplifier of brakes
   Pumping of brake system
   Adjustment of a pedal of a foot brake
   Check of serviceability of functioning and replacement of the sensor switch of stoplights
   Sensors and ABS system activator
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Check of a condition and replacement of brake lines and hoses

 PERFORMANCE ORDER

1. Approximately time in half a year, having lifted the car, check all flexible hoses connecting steel tubes of hydraulic contours to brake mechanisms of wheels, on existence of cracks, signs of damage of a protective cover, traces of leakages of liquid, swellings and other damages. Hoses are a critical and most vulnerable component of brake system therefore their survey should be made with all care – use a pocket small lamp and a small mirror. At identification of any doubtful signs the suspected hose is subject to replacement.
2. At replacement of brake lines it is necessary to give particular attention to selection of replaceable components. At all it is not necessary to establish to the hydraulic highway of brake system the copper tubes, not capable to sustain efforts developed in contours. Try to get firm steel lines in representation offices of the company manufacturer of the car, it is preferable to buy already cut on length and the sections equipped with shtutserny nozzles. Flexible hoses also should be the first-rate quality.
3. At installation of brake lines watch, that they passed not less than in 20 mm of vibrating and moving elements of a suspension bracket and the power unit.
4. At an otpuskaniye of nuts of shtutserny sockets of connection of steel lines with flexible hoses use a special cap natural a cutting head (address to an accompanying illustration).
5. Having released a nut, take a clamp and liberate a hose from a basic arm (address to an accompanying illustration).
6. At a detachment of a flexible hose from a support of the brake mechanism turn out a hollow bolt of the shtutserny socket and will throw out old sealing washers. At connection of a washer are subject to replacement without fail.
7. At a rassoyedineniye of two hoses use two rozhkovy keys. Watch, that when joining hoses there was no their twisting.
8. For fastening of steel lines the set of intermediate clamps is usually used. The failed clamps are subject to replacement without fail!
9. Watch reliability of fastening of brake lines in all provided intermediate clamps and basic arms.
10. Having finished installation of new sections of hydraulic lines, check liquid level in the GTTs tank. In case of need make the corresponding adjustment. Pump over brake system (see. Section Pumping of brake system). Before starting operation of the car make sure of serviceability of functioning of brakes.