Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
- Power supply system and production of the fulfilled gases
   Specifications
   Sbrasyvaniye of pressure in a power supply system
   Check of serviceability of functioning of the fuel pump, measurement of pressure of fuel
   Check of a condition and replacement of fuel lines and their shtutserny connections
   Removal and installation of a fuel tank
   Cleaning and repair of a fuel tank - general information
   Removal and installation of the fuel pump
   Replacement of the sensor of fuel consumption
   Removal and installation of assembly of an air purifier
   Removal, installation and adjustment of a cable of an accelerator
   System of electronic injection of fuel (EFI) - the general information
   Check of serviceability of functioning of system of electronic injection
   Check of a condition and replacement of components of system of injection
   Release system - the general information
   Removal and installation of nozzles
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Removal and installation of nozzles

Details of installation of nozzles

1, 5 — the Vacuum hose (models with EGR system)
2 — the Returnable fuel tube of a nozzle No. 3
3, 26 — the Clip
4, 12 — the Vacuum hose
6 — the Returnable fuel tube of a nozzle No. 1
7, 11, 16, 18, 23, 25 — Laying
8 — the Sealing washer
9 — the Cover of a head of cylinders
10, 27 — Termozashchitny the screen
13 — the Inlet pipeline
14 — the Heater on an admission
15 — an EGR valve Arm
17 — Assembly of the inlet pipeline
19 — the Nozzle
20 — the Adapter
21 — the Sealing ring
22 — a nozzle Saddle

24 — Fuel tubes of a high pressure
28 — Assembly of a drive of a butterfly valve
29 — the Socket of the sensor of provision of a pedal of gas
And — Without EGR system
B, With — EGR system
15 — an EGR valve Arm
17 — Assembly of the inlet pipeline
19 — the Nozzle
20 — the Adapter
21 — the Sealing ring
22 — a nozzle Saddle
24 — Fuel tubes of a high pressure
28 — Assembly of a drive of a butterfly valve
29 — the Socket of the sensor of provision of a pedal of gas
And — Without EGR system
B, With — EGR system


 PERFORMANCE ORDER

1. Remove inlet fellings
2. Uncover heads of cylinders
3. Disconnect the socket of the sensor of provision of a pedal of gas and remove assembly of a drive of a butterfly valve.
4. Remove a returnable fuel tube of a nozzle No. 1 and a tube of a high pressure.
5. Remove adapters between nozzles and tubes of a high pressure from a head of cylinders.
6. Turn out a bolt of fastening of a clip of a nozzle.
7. Take out a nozzle with a saddle from a head of cylinders.
8. Remove from a nozzle sealing rings
9. Installation is made upside-down. Tighten fixture with demanded effort.