Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation

Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
- Transmission line
   Driveshafts and hinges - the general information
   Check of a condition of the transmission line
   Removal and driveshaft installation
   Replacement of kardanny hinges
   Driving shaft/semi-axes, - the general information and condition check
   Removal and installation of semi-axes, bearings and epiploons of the back bridge
   Replacement of an epiploon of a leading gear wheel of differential
   Removal and installation of assembly of the back bridge
   Removal and installation of power shafts
   Replacement of protective covers and service of CV JOINTS
   Removal and installation of assembly of forward differential
   Removal and installation of naves with a disconnected drive
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Check of a condition of the transmission line


1. To Poddomkratta a car back also establish it on props, prop up forward wheels protivootkatny boots.
2. Having appropriated for the car, visually estimate a driveshaft condition. In case of identification of deformations and cracks replace a shaft.
3. Check the forward and back ends of a shaft on existence of signs of development of leaks. In case of need make replacement of the corresponding epiploon (ов) (see. Section Replacement of an epiploon of a leading gear wheel of differential).
4. Without getting out from under the car, ask the assistant повращать car wheels, having caused thereby driveshaft rotation, hinges should be turned freely and silently. Estimate a condition of a rubber element of assembly of the central bearing, replace defective components.
5. The condition of kardanny hinges can be checked and at a motionless shaft, urgently grasp each of sections of the hinge and try повращать them from each other, existence a little appreciable люфта testifies to wear of internal components of sharnirny assembly.
6. Estimate reliability of a tightening of fixing bolts of a connecting flange.
7. Check shaft on existence of leaks through epiploons of sliding couplings.
8. Taking an opportunity check also on existence of signs of leaks driving shaft/semi-axes. Estimate a condition of protective covers of hinges of equal angular speeds. In case of need make replacement of epiploons of differential.