|
Replacement of the coil of ignition
Details of installation of bobbin assemblies
|
|
1. Disconnect a negative wire from the battery.
|
|
If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action! |
2. Remove the inlet pipeline.
3. Previously having marked, disconnect sockets from ignition coils (address to an illustration above).
4. Give bolts of fastening and remove ignition coils from a head of cylinders.
5. Installation is made upside-down. Track the correct installation of all coils on the places. Bolts of fastening tighten the moment of 78 Nanometers. Get engines and be convinced of its normal work. |
|
|