Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
- Engine electric equipment
   Specifications
   Engine start from the auxiliary power supply
   Removal and installation of the storage battery
   Check of a condition and replacement of wires of the battery
   Ignition system - the general information and precautionary measures (petrol models)
   Check of functioning of system of ignition
   Replacement of the coil of ignition
   Check and adjustment of installation of a corner of an advancing of ignition/injection of fuel of the petrol engine
   Replacement of the module of ignition
   Charge system - the general information and precautionary measures
   Check of a condition of system of a charge
   Removal and generator installation
   Check of a condition and replacement of components of the generator
   Start system - the general information and precautionary measures
   Check of serviceability of functioning of a starter and start chain
   Removal and starter installation
   Removal and installation of the traction relay
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Removal and installation of the traction relay

 PERFORMANCE ORDER

1. Remove a starter (see. Section Removal and starter installation).
2. With Chertilka or paint mark the provision of a casing of the electromotor of a starter of rather reduktorny section (address to an accompanying illustration).
3. Disconnect the tire connecting a starter to the traction relay.
4. Turn out screws of fastening of reduktorny section of starterny assembly to the electromagnetic actuator (address to an accompanying illustration).
5. Turn out through bolts of fastening to each other reduktorny and motor sections of a starter (address to an accompanying illustration).
6. Separate motor section of assembly from reduktorny, then remove from the last the traction relay.