Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
- Gear shifting box
- Automatic transmission (AT)
AT problem diagnostics - the general information
Adjustment of draft of gear shifting
Check, adjustment and replacement of the sensor switch of permission of start
Removal and installation of assembly of the lever of the AT selector
Removal and installation of automatic transmission
+ Transfer case
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Removal and installation of assembly of the lever of the AT selector
|
|
1. Remove the top panel of the back console (see. Head Body).
2. Remove handles of switches and dismantle the control panel of heating of seats (see. Head of System of cooling of the engine, salon and air conditioning heating).
3. Remove the handle of the lever of switching of modes of a transfer case.
4. To Poddomkratta the car also establish it on props.
5. Remove a clamp, give a nut of fastening of draft of gear shifting to the selector lever, do not forget to remove a washer.
6. Disconnect electroconducting and turn out bolts of fastening of the basis of assembly of the lever of the selector of transfers.
7. Installation is made upside-down. Track, that all fixture was tightened with demanded effort. |
|
|
|