Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
- Settings and routine maintenance of the car
Specifications
Schedule of routine maintenance
General information about settings and adjustments
Check of levels of liquids
Check of a condition of tires and pressure of their rating
Check of level of the AT working liquid
Check of level of liquid of the power steering
Replacement of impellent oil and oil filter
Check, service and battery room charging
Check of a condition of components of system of cooling
Check of a condition and replacement of the hoses located in an impellent compartment
Check of a condition and replacement of brushes of screen wipers
Rotation of wheels
Check of a condition of components of a suspension bracket and steering drive
Greasing of components of the chassis
Check of a condition of components of system of production of the fulfilled gases
Check of level of greasing in a transfer case
Check of level of greasing of differential
Check of a condition of seat belts
Check and adjustment of turns of idling
Check of a condition of protective covers of power shafts
Check and replacement of the valve of system of operated ventilation of a case (PCV)
Replacement of a filtering element of an air purifier
Condition check, adjustment of effort of a tension and replacement of driving belts
Check of a condition of components of a power supply system
Check of brake system
Adjustment of height of situation and free wheeling of a pedal of a brake
Check of a condition and replacement of spark plugs (petrol engines)
Check and adjustment of gaps of valves
Replacement of the fuel filter
Check and service of the conditioner of air (To/in)
Service of system of cooling
Condition check, stuffing by greasing and adjustment of forward naves and wheel bearings
Replacement of ATF of automatic transmission and main transfer
Replacement of greasing of a transfer case
Replacement of greasing of differential
Check of a condition of components of system of catching of fuel evaporations
Check of serviceability of a condition of components of system of a retsirkulyatsiya of the fulfilled gases (EGR)
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Check of level of the AT working liquid
Correctness of level of ATF is one of critical operational parameters of the models equipped with AT. Excessive falling of level of ATF can lead to hydrotransformer pro-slipping whereas the excessive amount of liquid conducts to its foaming, to formation of leaks and is fraught with a transmission exit out of operation.
Check of level of ATF should be made at the transmission warmed up to normal working temperature (20-30 km of run, 70-80 °C).
|
|
It is not necessary to make check of level of ATF right after car operation on high speeds, in the conditions of a city cycle in hot weather, or after trailer towage, previously let's liquids cool down within about 30 minutes. |
|
|
1. Park the car on an equal horizontal platform with a firm covering, strongly cock the parking brake. If the engine cold, start it and warm up to normal working temperature on single turns. At the working engine squeeze out a pedal of a foot brake and serially carry out the AT selector lever through all provisions, having in summary returned it to the situation "R".
|
|
2. Without suppressing the engine, take from a directing tube measuring щуп (address to an accompanying illustration). Fingers remove from an edge щупа traces of ATF and to the touch estimate its condition. |
3. Carefully wipe an edge pure rags and enter щуп back into directing tube, having densely planted a cover on a mouth.
|
|
4. Again take щуп from a mouth and by length of the moistened site of an edge determine ATF level in a transmission case (address to an accompanying illustration). In case of need make the corresponding adjustment, through a funnel having added in transmission liquid of a demanded grade, – аливайте ATF is direct in a mouth of a directing tube measuring щупа. |
5. Lifting of level of ATF from the bottom border of a working range щупа to top needs about 0.6 l of liquid – add ATF in the small portions in stages, each time checking level.
6. At the same time with level it is necessary to check as well ATF condition. If the liquid moistening the end of an edge щупа has a dark red-brown shade, or smells as ashes, ATF should replace (see. Section Replacement of ATF of automatic transmission and main transfer). In the absence of confidence of correctness of an assessment of a condition of transmission liquid compare it on color and a smell to fresh ATF. |
|
|
|