Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
- Settings and routine maintenance of the car
   Specifications
   Schedule of routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of the AT working liquid
   Check of level of liquid of the power steering
   Replacement of impellent oil and oil filter
   Check, service and battery room charging
   Check of a condition of components of system of cooling
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition and replacement of brushes of screen wipers
   Rotation of wheels
   Check of a condition of components of a suspension bracket and steering drive
   Greasing of components of the chassis
   Check of a condition of components of system of production of the fulfilled gases
   Check of level of greasing in a transfer case
   Check of level of greasing of differential
   Check of a condition of seat belts
   Check and adjustment of turns of idling
   Check of a condition of protective covers of power shafts
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Replacement of a filtering element of an air purifier
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition of components of a power supply system
   Check of brake system
   Adjustment of height of situation and free wheeling of a pedal of a brake
   Check of a condition and replacement of spark plugs (petrol engines)
   Check and adjustment of gaps of valves
   Replacement of the fuel filter
   Check and service of the conditioner of air (To/in)
   Service of system of cooling
   Condition check, stuffing by greasing and adjustment of forward naves and wheel bearings
   Replacement of ATF of automatic transmission and main transfer
   Replacement of greasing of a transfer case
   Replacement of greasing of differential
   Check of a condition of components of system of catching of fuel evaporations
   Check of serviceability of a condition of components of system of a retsirkulyatsiya of the fulfilled gases (EGR)
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Adjustment of height of situation and free wheeling of a pedal of a brake

Height of provision of a pedal

The size of removal of its block from a floor (address to an accompanying illustration) is called as height of provision of a pedal.

If the considered parameter falls outside the limits an admissible range (see. Specifications), it is necessary to make the corresponding adjustment (see further).

 PERFORMANCE ORDER

1. Before starting measurement of height of provision of a pedal of a brake make sure that the last is completely released, then start the engine and several times squeeze out a gas pedal for the purpose of activation of the vacuum amplifier of brakes. Measure height of provision of a pedal. In case of need make the corresponding adjustment for what weaken a lock-nut and release a lock bolt / датчик-выключатель stoplights, then weaken a lock-nut of a pusher and rotation of a rod of the last deduce pedal height on the middle of an admissible range (address to an accompanying illustration). Do not forget to tighten a lock-nut.
2. Having finished pedal adjustment, screw a lock bolt / датчик-выключатель against the stop it in the lever of pedal assembly (without a tightness).

Free wheeling of a pedal

The size of its moving from the top point to a point is called as a free wheeling of a pedal, in which there is a feeling of resistance to squeezing (address to an accompanying illustration), i.e. prior to the beginning of activation of a hydraulic drive of brake system.

If the result of measurement falls outside the limits an admissible range, it is necessary to make the corresponding adjustment (see further).

 PERFORMANCE ORDER

Before measurement of size of a free wheeling of a pedal of a brake it is necessary to squeeze out it from half-dozen of times at the muffled engine. Weaken a lock-nut and achieve demanded result rotation of a rod of a pusher. Tighten a lock-nut.