Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
- Settings and routine maintenance of the car
Specifications
Schedule of routine maintenance
General information about settings and adjustments
Check of levels of liquids
Check of a condition of tires and pressure of their rating
Check of level of the AT working liquid
Check of level of liquid of the power steering
Replacement of impellent oil and oil filter
Check, service and battery room charging
Check of a condition of components of system of cooling
Check of a condition and replacement of the hoses located in an impellent compartment
Check of a condition and replacement of brushes of screen wipers
Rotation of wheels
Check of a condition of components of a suspension bracket and steering drive
Greasing of components of the chassis
Check of a condition of components of system of production of the fulfilled gases
Check of level of greasing in a transfer case
Check of level of greasing of differential
Check of a condition of seat belts
Check and adjustment of turns of idling
Check of a condition of protective covers of power shafts
Check and replacement of the valve of system of operated ventilation of a case (PCV)
Replacement of a filtering element of an air purifier
Condition check, adjustment of effort of a tension and replacement of driving belts
Check of a condition of components of a power supply system
Check of brake system
Adjustment of height of situation and free wheeling of a pedal of a brake
Check of a condition and replacement of spark plugs (petrol engines)
Check and adjustment of gaps of valves
Replacement of the fuel filter
Check and service of the conditioner of air (To/in)
Service of system of cooling
Condition check, stuffing by greasing and adjustment of forward naves and wheel bearings
Replacement of ATF of automatic transmission and main transfer
Replacement of greasing of a transfer case
Replacement of greasing of differential
Check of a condition of components of system of catching of fuel evaporations
Check of serviceability of a condition of components of system of a retsirkulyatsiya of the fulfilled gases (EGR)
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Replacement of a filtering element of an air purifier Replacement of a filtering element is made regularly according to the schedule of routine maintenance of the car. During car operation the condition of the filter should be checked rather often, in particular in the conditions of strongly dusty district.
|
|
1. Find an air purifier in an impellent compartment (address to accompanying illustrations in Settings and routine maintenance of the car).
|
|
2. Release spring clamps of fastening of a cover of an air purifier (address to an accompanying illustration). Disconnect all procedures stirring to performance hoses and uncover, try not to allow falling in an air purifier of extraneous subjects. |
|
|
3. Take filtering element and wipe internal walls of a casing pure rags (address to an accompanying illustration).
|
4. Visually estimate a condition of a filtering element, in case of strong pollution make replacement. Filter moderately hammered by a dust can be blown the compressed air (through a back surface).
|
|
When using the compressed air surely put on goggles! |
The filtering element made of a wax paper cannot be washed out with application of oils or solvents if to achieve satisfactory result by a purge it is not possible, make replacement.
|
|
In order to avoid premature wear of internal components of the engine and emergence of flashes in a final path do not maintain the car with the taken air filter! |
5. Establish a replaceable filtering element, track correctness of its landing in a casing.
6. Plant into place a cover and fix it spring clamps.
7. Be convinced of density and correctness of installation of all components of an inlet path. |
|
|
|