Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
- Settings and routine maintenance of the car
   Specifications
   Schedule of routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of the AT working liquid
   Check of level of liquid of the power steering
   Replacement of impellent oil and oil filter
   Check, service and battery room charging
   Check of a condition of components of system of cooling
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition and replacement of brushes of screen wipers
   Rotation of wheels
   Check of a condition of components of a suspension bracket and steering drive
   Greasing of components of the chassis
   Check of a condition of components of system of production of the fulfilled gases
   Check of level of greasing in a transfer case
   Check of level of greasing of differential
   Check of a condition of seat belts
   Check and adjustment of turns of idling
   Check of a condition of protective covers of power shafts
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Replacement of a filtering element of an air purifier
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition of components of a power supply system
   Check of brake system
   Adjustment of height of situation and free wheeling of a pedal of a brake
   Check of a condition and replacement of spark plugs (petrol engines)
   Check and adjustment of gaps of valves
   Replacement of the fuel filter
   Check and service of the conditioner of air (To/in)
   Service of system of cooling
   Condition check, stuffing by greasing and adjustment of forward naves and wheel bearings
   Replacement of ATF of automatic transmission and main transfer
   Replacement of greasing of a transfer case
   Replacement of greasing of differential
   Check of a condition of components of system of catching of fuel evaporations
   Check of serviceability of a condition of components of system of a retsirkulyatsiya of the fulfilled gases (EGR)
+ Engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Specifications

Recommended greasings and liquids

Below greasings and the liquids recommended for application by the company manufacturer of cars at the moment of drawing up of the real Management are listed. Fresher information can be received at firm car repair shops of the Toyota company.

Type and properties of working liquids

The temperature range considered before the following replacement of oil on petrol engines

The temperature range considered before the following replacement of oil on diesel engines


Characteristic

Value

Impellent oil:

   Type

      Petrol engines

Universal engine oil for petrol engines of the class SL or SJ on API

      Diesel engines

Engine oil for diesel engines of the class CF-4 (alternative – CE or CD) on API

   Viscosity

See the viscosity card on illustrations above

Cooling liquid

(50-70) % antifreeze solution on base этиленгликоля with water

Brake liquid

DOT 3, DOT 4 or SAE J1703

GUR system liquid

ATF DEXRON II or III

Transmission liquid for AT

ATF DEXRON II or III

Oil for a transfer case

Transmission oil viscosity of SAE 75W-90 of the API GL-4/GL-5 type

Oil for forward and back differential

Gipoidnoye transmission oil viscosity of SAE 80W-90 of the API GL-5 type

Greasing for the chassis

   Bearings of wheels and driveshafts

Lithium NGLI No 2 greasing

   Spherical support and axial loose leaves of a forward power shaft

Lithium NGLI No 1 greasing

Volumes of working liquids, л*

Characteristic

Value

Fuel

See head Governing bodies and operation receptions

Impellent oil

   Engine 2UZ-FE

      Without filter replacement

6.4

      With filter replacement

6.8

   Engine 1HD-FTE

      Without filter replacement

10.1

      With filter replacement

11.4

System of cooling of the engine

   Engine 2UZ-FE

      Without a back heater

14.7

      With a back heater

15.3

   Engine 1HD-FTE

13.3

Transmission liquid for AT (to merge and fill)

   Engines 2UZ-FE

1.9

   Engines 1HD-FTE

6.0

Oil for a transfer case (to merge and fill)

   Engine 2UZ-FE

1.4

   Engine 1FZ-FTE

1.6

Back differential (to merge and fill)

   Without differential blocking

      Engine 2UZ-FE

3.3

      Engine 1FZ-FTE

3.2

   With differential blocking

3.2

Forward differential (to merge and fill)

   Engine 2UZ-FE

1.7

   Engine 1HD-FTE

2.8

GUR system liquid

0.8

* All volumes are specified only approximately. At adjustment be verified with urovnevy labels.

Ignition system

Spark plugs

Characteristic

Value

Type of candles / candle gap, mm

   Engine 2UZ-FE

Denso SK20R11 or NGK IFR6A11/1.1

Storage battery

Characteristic

Value

Nominal density of electrolit (at temperature the 20th hail.), g/cm 3

1.25 ÷ 1.29

Rated voltage (at temperature the 20th hail.), In

12.5 ÷ 12.9

Ignition order

Characteristic

Value

Engines 2UZ-FE

1–8–4–3–6–5–7–2

Engines 1HD-FTE

1–4–2–6–3–5

Turns of idling, mines–1

Characteristic

Value

Engine 2UZ-FE

650 ÷ 750

Engine 1HD-FTE

   Minimum turns

550 ÷ 650

   Maximum turns

4300 ÷ 4500


In case of different interpretations it is necessary to prefer data from VECI label.


Data on installation of a corner of an advancing of ignition see in Specifications to Head "Engine electric equipment".

Klapannye gaps (at the cold engine), mm

Characteristic

Value

Engine 2UZ-FE

   Inlet valves

0.15 ÷ 0.25

   Final valves

0.25 ÷ 0.35

Engine 1HD-FTE

   Inlet valves

0.17 ÷ 0.23

   Final valves

0.47 ÷ 0.53

Brake system

Characteristic

Value

Minimum admissible thickness of frictional overlays of blocks, mm

1

Minimum admissible thickness of a substrate of frictional overlays of back blocks, mm

2

Adjustments of a pedal of a brake

Characteristic

Value

Free wheeling, mm

1.0 ÷ 6.0

The maximum gap of a pedal by pressing with strength of 490 N at the working engine, mm

   With ABS

116

   Without ABS

94

Adjustment of the parking brake, number of clicks of a ratchet

Characteristic

Value

At a tightening with strength of 196 N

4 ÷ 6

Suspension bracket and steering

Characteristic

Value

Maximum admissible люфт steering wheel, mm

40

The maximum difference of levels of GUR liquid at the started and stopped engine, mm

5

Deflection of the used driving belt at pressure of 98 N, mm


Characteristic

Value

The engine 1HD-FTE (address to an illustration above)

   1

from 8 to 11

   2

from 15 to 20

On engines 2UZ-FE the automatic natyazhitel of driving belts is established

Pressure of a rating of tires

See. Specifications to Head Governing bodies and receptions of safe operation of the car.

Efforts of a tightening of carving connections, Nanometer

Connection type

Value

Nuts of fastening of fuel lines to the fuel filter

29

Bolts of the pallet of a case of AT

7.4

Bolts Ý/m AT valves

10

AT filter bolts

10

Drain stopper of AT

20

Drain/jellied stopper of a transfer case

37

Jellied stopper of differential
 
   The back
49
   The forward
39
Spark plugs
18
Drain stopper of the pallet of a case of the engine
27
Nuts of fastening of wheels 131