Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 of release

Repair and car operation



Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and receptions of safe operation of the car
+ Settings and routine maintenance of the car
- Engine
   + Typical procedures of service of engines
   + Procedures of service of the petrol engine
   - Procedures of service of the diesel engine
      Removal, installation, dismantling and assembly of a head of cylinders
      Removal and installation of the inlet pipeline and final collector
      Removal, check of a condition and installation of a belt of a drive of GRM
      Removal and installation of cogwheels of a drive of GRM
      Replacement of a forward epiploon of a cranked shaft and camshaft and TNVD epiploons
      Replacement of a back epiploon of a cranked shaft
      Removal and installation of camshafts and pushers of valves
      Removal and installation of the pallet of a case of the engine
      Removal, check of a condition and installation of the oil pump
      Removal and installation of a maslookhladitel
      Removal and installation of a driving disk
+ Systems of cooling of the engine, salon and air conditioning heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Removal and installation of a maslookhladitel

Components of assembly of a maslookhladitel are presented on an accompanying illustration.

Components of installation of a maslookhladitel

1 — the Cover of a maslookhladitel
2, 4, 6 — Laying
3 — the Return valve
5 — Maslookhladitel
7 — Shchup
8 — the Filter
9 — the Tube щупа

10 — tube Consolidation
11 — the Stopper
12 — the Washer
13 — the Spring
14 — the Safety valve
15 — the Case of a safety valve
16 — the Drain stopper


 PERFORMANCE ORDER

1. Merge OZh and remove the oil filter
2. Remove a gear belt and TNVD cogwheel.
3. Remove TNVD.
4. Take out щуп and remove it directing.
5. Give fixture and remove assembly of a maslookhladitel.
6. If necessary turn out the ECT sensor.
7. Give 4 nuts and separate a cover from a maslookhladitel.
8. Remove safety and return valves.
9. Installation is made upside-down. Tighten fixture with demanded effort.